DWE4012 4-1/2” (115 mm) PADDLE SWITCH SMALL ANGLE GRINDER

The DWE4012 4-1/2” (115 mm) Paddle Switch Small Angle Grinder has a powerful 7 Amp motor for fast material removal. One-Touch™ Guard eliminates the need for a tool to adjust the guard location.

Features & Specs

FEATURES

  • 7.5 amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection
  • One-Touch™ Guard allows for a single action to adjust the guard. No buttons or levers, just turn the guard to position it.
  • Hex wrench replaces spanner wrench - hex wrench is found in most tool boxes if lost
  • Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces
  • Quick-Change™ wheel release allows tool-free wheel removal without the need for a wrench
  • 2-position removable side handle provides increased comfort and control
  • Slim, ergonomic body design provides increased comfort in extended use applications
  • 5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories

Specifications

  • Amps 7.5 Amps
  • Dust Ejection System™ No
  • Max Watts Out 850 W
  • No Load Speed 12,000 rpm
  • Power Tool Type Corded
  • Spindle Thread 5/8"-11
  • Switch Type Paddle
  • Tool Length 10-5/8"
  • Tool-Free Flange System Yes
  • Wheel Diameter 4-1/2"

Includes

  • 2-position side handle
  • Depressed center wheel
  • One-Touch™ Guard
  • Hex Wrench

Warranty & Service Information

FAQs

  • ?

    2016 NAPA DeWALT Q1 REBATE 1-1-2016

    We are offering the following DEWALT manufacturer's mail-in rebates with the purchase of select DEWALT tools from any authorized participating NAPA Tools & Equipment retailer. Please note the following promotion highlights:
     
    I BOUGHTI GET
    DCK397M2, DCK398HM2, DCF899HB, DCGG571M1, DCF899P1, DCF889HM2, DCK490L2, DCF899HP2, DCK296M2, OR DCK590L2DCF885B, DCD780B, OR DCB205
    DCF883M2, DCF895D2. DCGG412P2, DCF880HM2, DCK280C2, OR DCS380P1DCL050, DCB201, OR DW2587
    DW059K2, DCK255X, OR DCK251XDC823B OR DC9096
    DWV012 OR DWE1622KDCL061 OR DWE4012
    DWMT74271DWMT70776L OR DWMT70784
    DWMT70773LDWMT70782L OR DW22812
    DWMT70774    DWMT70783 
    • This offer is only available at participating authorized NAPA Tool & Equipment retailers.
    • You must purchase a qualifying tool between January 1, 2016 and March 31, 2016.
    • You claim must be postmarked on or before April 15, 2016.
    To receive your rebate you must include the following:
    • A redemption form completed in its entirety. Download the attached file located at the end of this answer.
    • Original NAPA sales receipt(s) or sales invoice(s) dated between 1/1/2016 and 3/31/2016. Photo copies will not be accepted (except for RI residents). It is recommended that you make a photo copy of all submitted materials for your records. Note: To resolve any potential questions or issues regarding your submission, you may be required to mail or fax these copies.
    • Original UPC barcode cut from the outside product packaging of the DEWALT product purchased.
    In a stamped envelope mail the above items to:

    DEWALT
    DWRP126
    PO Box 42833
    Towson, MD 21284

    Please allow 5-7 weeks for delivery. To check the status of your rebate please call 866-444-5290.

    Thank you for your interest in DEWALT tools. It has been our pleasure to provide this information. For additional details, disclaimers and exclusions please read the fine print found on the rebate form.
     
  • ?

    2015 NAPA DEWALT Q4 REBATE 10-1-2015

    We are offering the following DEWALT manufacturer's mail-in rebates with the purchase of select DEWALT tools from any authorized participating NAPA Tools & Equipment retailer. Please note the following promotion highlights:
    I BOUGHTI GET
    DCF889P2, DCF899P1, DCF899B, DCF899HP2, OR DCF899HBDCB205, DCF885B, OR DCD780B
    DCK398HM2, DWV012, DW059K-2, DWE1622K, DCK286D2, DCK296M2, DCF889HM2, DCF895M2, DCK255X, DCK251X, DCK490L2, DCK455X, OR DCK590L2DCR006 OR DCB205
    DCK211S2, DCK212S2, DCF813S2, OR DCT412S1DCL510, DCB090, OR DCB127
    DCS371P1, DCG412P2, DCS380P1, DCF883M2, DCD780C2, DCF895D2, DCS355D1, OR DCF880HM2DCR006 OR DCB205
    DWP849X, DWP849, DWV010, DW293, OR DWE4887DWE4012 OR D26453K
    DWE402, DWE4011, DW235G, D26960K, 7424XP OR DW758DWMT73808
    D55140, D55146, D55151, D55167, OR D55154     DWMT70783, DWMT70784, OR DWMT70785 
    DWMT74271, DWMT70773L, OR DWMT70774  DWMT73805 
    DWMT70775, DWMT70776L, DWMT70777, DWMT70778, DWMT70779, DWMT70780, DWMT70781L, DWMT70782L, DWMT70783, DWMT70784, DWMT70785, or DWMT70786LDWHT10272
      
    • This offer is only available at participating authorized NAPA Tool & Equipment retailers.
    • You must purchase a qualifying tool between October 1, 2015 and December 31, 2015.
    • You claim must be postmarked on or before January 15,2016.
    To receive your rebate you must include the following:
    • A redemption form completed in its entirety. Download the attached file located at the end of this answer.
    • Original NAPA sales receipt(s) or sales invoice(s) dated between 10/01/2015 and 12/31/2015.Photo copies will not be accepted (except for RI residents). It is recommended that you make a photo copy of all submitted materials for your records. Note: To resolve any potential questions or issues regarding your submission, you may be required to mail or fax these copies.
    • Original UPC barcode cut from the outside product packaging of the DEWALT product purchased.
    In a stamped envelope mail the above items to:

    DEWALT
    DWRP113
    PO Box 42833
    Towson, MD 21284

    Please allow 5-7 weeks for delivery. To check the status of your rebate please call 866-444-5290.

    Thank you for your interest in DEWALT tools. It has been our pleasure to provide this information. For additional details, disclaimers and exclusions please read the fine print found on the rebate form.