DWANRRIR

IMPACT CONNECT™ Nut Runner Attachment

Name: IMPACT CONNECT™ Nut Runner Attachment
Brand: DW
SKU: DWANRRIR

A DEWALT branded yellow and black adjustable mounting bracket designed for photography and construction applications, featuring various knobs and slots for attachment and adjustment.

Reviews

Product details

Work fast and save time on threaded rod applications with the IMPACT CONNECT™ Nut Runner Attachment. This attachment is 3X faster than running nuts by hand† and offers a lifting capacity of up to 100 lbs.** Featuring the revolutionary quick-change brace system, the IMPACT CONNECT Nut Runner Connects to impact drivers in seconds and allows you to seamlessly switch between driving screws and running nuts without additional interruptions. with a split socket design that enables access to trapped nuts, the IMPACT CONNECT Nut Runner Attachment is ideally suited for mechanical, electrical, or plumbing jobs utilizing trapeze systems, cable trays, or other threaded rod ceiling suspension systems.

3X Faster Than Running Nuts by Hand† - Revolutionize your productivity with this attachment that is 3X faster than running nuts by hand†
Powerful Lift Capacity - Tackle tough jobs with hardened steel gears that provide a lifting capacity of up to 100 lbs**
Maximize Accessibility - Rotate 360º for accessibility in tight spaces
Application Versatility - Take on a wide range of applications with 7 compatible nut sizes and 4 compatible rod sizes including 3/8 in. standard and heavy, 1/2 in. standard and heavy, 1/4 in. standard and heavy, and 5/8 in. standard (1/4 in. and 5/8 in. sizes sold separately)
Quick-Change Brace - Attach in seconds to go from driving screws to running nuts
Multi-Brand Compatibility - Works with DEWALT 20V MAX* and select other pro-grade 18V Impact Drivers‡
Limit Fatigue - Leverage the power of your impact driver‡ to reduce fatigue when completing tough repetitive tasks
Maximize Efficiency - Save time with an integrated reset feature that brings the attachment back to the open position and offers quick access to trapped nuts on multi-level or trapeze systems

Product Type

Impact Attachment

Individual or Set

Set

Piece Count

Impact or Standard

Impact

Product Material

Steel

(1) DWANRRIR Nut Runner
(4) Inserts: 9/16", 11/16", 3/4", 7/8"
(1) Brace Bracket

3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed

Our DEWALT® Customer Service team is available 24 hours a day, 7 days a week. Contact us via chat, form, or phone.

Customer Support

* *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

* †Run time only. On average, running 3/8" standard nuts on 3/8" threaded rod using DCF887 impact driver and DCB204 battery (impact driver and battery sold separately) vs. by hand.

* **In lab conditions, when used with DCF845 impact driver (sold separately), can produce up to 1825 in-lb. (205Nm) torque in setting 3 which applies over 100lb linear force when applied to 1/2" threaded rod in good condition. Performance may vary based on materials, finish, hardness, coatings, grade and condition of the threaded rod and nut.

* ‡Compatible with select Pro-Grade Impact Drivers. Optimized for: DEWALT DCF840, DCF845 DCF850, DCF860 (setting 2), DCF870, DCF885, DCF887, DCF888. Compatible with: DEWALT DCF787, DCF809; CRAFTSMAN CMCF810, CMCF820; BOSCH® 25618, IDH182, GDX18V-1800C FLEX 1351, FX1371A; KOBALT K18ID-16A; MAKITA LXDT01, LXDT08, XDT11, XDT13, XDT14, XDT15, XDT16, XDT18; METABO WH18DBDL2, WH18DDX; MILWAUKEE 2653-20, 2656-20, 2760-20, 2850-20, 2853-20. CRAFTSMAN and LENOX are registered trademarks of Stanley Black & Decker, Inc. BOSCH, FLEX, KOBALT, MAKITA, METABO, and MILWAUKEE are registered trademarks of Robert BOSCH® GmbH, Flex-Elektrowerkzeuge GmbH, LF, LLC, Makita Corp., Metabowerke GmbH, and Milwaukee® Electric Tool Corp., respectively, none of which has endorsed or approved this product or its statement of compatibility.