The DW682K Plate Joiner Kit has a powerful motor for working with hard woods. Features a dual rack and pinion fence ensuring blade and fence parallelism for accurate joints every time. Integral one-piece fence is adjustable and tilts 0-90°.
6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
Integral one-piece fence is adjustable and tilts 0-90°
Flush cuts can be made at 0° without removing fence
45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
Non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
Retractable, anti-slip pins help hold work in place
Preset depth stops for all common biscuit sizes
Power Tool TypeCorded
Tool Height6.75 in
Tool Weight6.6 lbs
Warranty & Service Information
What is the kerf or thickness of the blade used on the DW682 plate joiner and how deep of a cut should it make?
The blade offered by DEWALT for this model is the DW6805, the thickness or kerf of the blade is .155" to .160".
When set properly the DW682K will produce a cut that is 1/4" deep for #0 biscuits, 3/8" deep for #10 biscuits, and 1/2" deep for #20 biscuits. Refer to the attached owners manual for information on setting your tool.
Can the DW682 plate joiner be used with a 2" blade?
No. The smallest blade that can be used on this plate joiner is 3".
You can contact Lamello at 1-800-252-6355 for a 3" blade.
Join MyDEWALT to register your tools and help protect your investment, rate and review products you love, receive special offers and learn about the newest DEWALT tools and accessories.